All-Pro FSS1530LPCES Instruction Manual

Browse online or download Instruction Manual for Floodlights All-Pro FSS1530LPCES. All-Pro FSS1530LPCES Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Questions?/¿Preguntas? 1-800-334-6871 [email protected]
1
Instruction Manual/Instrucciones
PACKAGING CONTENTS/CONTENIDO DEL PAQUETE
When mounting to a wall, make sure the xture is
7 in. on center away from eave and 13 inches on
center away from inside corner of the exterior
wall (Fig. 1).
MOUNTING AND WIRING YOUR FIXTURE
WARNING: Risk of electric shock. Disconnect
power at fuse or circuit breaker before installing
or servicing.
NOTE: Fixture can be wall or eave mounted (Fig. 2).
NOTE: Coverplate mounts to recessed mounted
standard junction boxes (Fig. 3). Junction box must be
at least 1-1/2 inch in depth for proper installation for
recessed mount application.
1. Line up the holes on the mounting bracket (B) with
the holes on your junction box. Using either (2) #6
screws or (2) #8 screws (D) (depending on size of
the holes in your junction box), attach the mounting
bracket (B) to your junction box (Fig. 4).
ITEMS REQUIRED
(Purchase separately)
Phillips screwdriver
Weatherproof silicone caulk
IMPORTANT SAFETY INSTRUCTIONS
When using product, basic precautions should always be followed, including the following:
Heed all warnings, including below warnings AND those included on product.
Save these instructions and warnings.
For outdoor use only.
cULus LISTED for wet location.
Disassembling your xture will void the warranty.
Your xture is prewired and preassembled for easy installation.
Read and follow these instructions.
Risk of re/electric shock. If not qualied, consult an electrician.
Disconnect power at fuse or circuit breaker before installing or servicing.
CAUTION
Connect xture to a 120 volt, 60 Hz power source. Any other connection voids
the warranty.
Fixture should be installed by persons with experience in household wiring or by a
qualied electrician. The electrical system, and the method of electrically connecting
the xture to it, must be in accordance with the National Electrical Code and local
building codes.
Fixture designed for wall or eave mount to a junction box only. Mount xture to a
grounded, recessed-mounted standard junction box marked for use in wet locations.
Do not mount below 5 feet.
SAVE THESE INSTRUCTIONS.
FOR BEST RESULTS
Install light 10-15 feet above the ground.
Do not mount xture close to reective surfaces
such as windows, white walls, white surfaces
and water.
When installing two xtures on one switch,
make sure the switch is rated for at least a
1 A inductive load.
When mounting coverplate, make sure the photo
sensor orientation is at the bottom.
FSS1530LPCES
(Bronze/Bronce)
A. Light fixture
Accesorio
ENGLISH
D. (2) #6-32 x 3/4 in. and (2) #8-32 x 3/4 in. junction box screws
(use the size that fits your junction box)
(2) Tornillos #6-32 x 3/4 pulg. y (2) tornillos #8-32 x 3/4 pulg.
para montaje de la caja de conexión
(utilice el tamaño que mejor se adecue a su caja de conexión)
E. (3) Wire nuts
(3) Conectores
de cable
C. Gasket
Junta
G. (2) Decorative screw cover caps
(2) Cubiertas tapatornillos decorativas
F. (2) #8-32 x 1-1/4 in. cover
mounting screws
(2) Tornillos #8-32 x 1-1/4 pulg.
de montaje de la cubierta
WARNING
B. Mounting bracket
Soporte de montaje
Round
1-1/2 in.
Octagonal
1-1/2 in.
3
2
Wall mount
Eave mount
4
D
B
D
Junction box
7 in.
13 in.
1
13 in.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - ENGLISH

Questions?/¿Preguntas? 1-800-334-6871 [email protected] Manual/InstruccionesPACKAGING CONTENTS/CONTENIDO DEL PAQUETE• W

Page 2 - ADVERTENCIA

2product caused by replacement bulbs or corrosion or discoloration of brass components are not covered by this warranty. LIMITATION OF LIABILITY:IN NO

Page 3 - GARANTIA LIMITADA DE 3 AÑOS

3• Cuando arme la cubierta protectora, asegúrese de que la orientación del sensor fotográco se encuentre en la parte de abajo.• Cuando lo arme en

Page 4 - Impreso en China

4Cooper Lighting, LLC no se hace responsable por la mercancía dañada durante el transporte. Los productos reparados o reemplazados estarán sujetos a l

Comments to this Manuals

No comments